TCC-0007
IS Echolot/Blinkleuchte, 24 V, gelbe Linse
- Zugelassen durch ATEX, IECEx
Gruppe I MI Ex ia I Ma
Gruppe II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
Zonen 0, 1, 2, 20, 21 & 22
Konform mit: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011) - Diodenpolarisiert und mit Endwiderständen kompatibel
- Weiße Basisversion verfügbar MOQ gelten
- Staubdicht und witterungsbeständig
- Anwendungen: Feuer, Sicherheit, Prozesskontrolle und allgemeine Signalisierung
Verwandte Produkte
Auf einen Blick
IS Sonos sounder beacon
The IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I (Mining) & Group II (Above Ground) applications and incorporates a high Ingress Protected IP66 enclosure.
The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones, selectable via a dip switch on the PCB and produces up to 105 dB at 1 meter. A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.
Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists & clicks into the pre-fixed base on commissioning avoiding any additional wiring & connections.
Further details can be found on the installation sheet’ This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo: 28 V, Io: 93 mA, Po: 660 mW, Ci: 0, Li 0. The minimum value of Uo should not drop below 23.6 V and the minimum value of Io should not drop below 50 mA.
The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones, selectable via a dip switch on the PCB and produces up to 105 dB at 1 meter. A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.
Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists & clicks into the pre-fixed base on commissioning avoiding any additional wiring & connections.
Further details can be found on the installation sheet’ This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo: 28 V, Io: 93 mA, Po: 660 mW, Ci: 0, Li 0. The minimum value of Uo should not drop below 23.6 V and the minimum value of Io should not drop below 50 mA.
Einzelheiten
- Zugelassen durch ATEX, IECEx Gruppe I MI Ex ia I Ma Gruppe II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da Zonen 0, 1, 2, 20, 21 & 22 Konform mit: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011)
- Diodenpolarisiert und mit Endwiderständen kompatibel
- Weiße Basisversion verfügbar MOQ gelten
- Staubdicht und witterungsbeständig
- Anwendungen: Feuer, Sicherheit, Prozesskontrolle und allgemeine Signalisierung
Technische Spezifikationen
| Electrical | ||
|---|---|---|
| Power supply type |
24 VDC
|
|
| VAD | ||
|---|---|---|
| Colour |
Bernstein
|
|
| Physical | ||
|---|---|---|
| Net weight |
0.33 kg
|
|
| Colour |
Rot
|
|
| Mounting type |
Montage auf Sockel
|
|
| Mounting position |
Decke
Wand
|
|
| Mounting base |
Tief
|
|
| Material |
Flame retardant Polycarbonate
|
|
| Environmental | ||
|---|---|---|
| Vandal proof |
No
|
|
| Operating temperature |
-40 bis +55ºC
|
|
| Relative humidity |
>90% bei 20ºC
|
|
| IP rating |
IP66
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 3
WEEE
|
|
| Certification |
CENELEC/ATEX
CPR
|
|
| Standards |
ATEX (EMT17ATEX0012X) IECEx (EMT 17.0005X)
|
|
Herunterladen
All downloadsDatenblatt
Zertifikate
DoP
DoC
DoC
.Others - DoC_20-8206-356-0004_TCC-00xx
DoP
.Others - UKCA / CE Declaration of Performance
Sofern verfügbar, werden die Downloads der Zertifikate, Software & Firmware und Medien in ihrer Standardsprache angezeigt.