Przejdź do treści

9-30441

Karta APIC adresowalnego interfejsu Excellence do Modulaser
  • Proste adresowanie w pętli urządzeń adresowalnych
  • Połączenie kablem taśmowym - bez dodatkowego okablowania
  • Możliwość podłączenia do modułu wyświetlacza ModuLaser
  • Łatwość ustawienia adresu
  • Bez konieczności ręcznego podłączania wejść i wyjść
Wyświetl wszystkie

Produkty powiązane

Na pierwszy rzut oka

Description

The 9-30441 is an interface which can be fitted directly into the ModuLaser display module. The card plugs into the main control board inside the display module enclosure. The board enables each detector (in the cluster or on the SenseNET network) to be directly addressed and communicate with the main fire control panel via the Aritech protocol.

Plug in terminals

Wiring onto the addressable loop is by way of plug in terminals located on the ModuLaser Minimum display or ModuLaser Standard display backplane. The APIC address range is easily adjusted by switch settings prominently positioned on the APIC card. The start and stop address of the range must be selected during installation, and mimics the SenseNet address range.

Single Display and Command Display modes

The Aritech APIC has two distinct modes of operation; single display and command display. When the interface is mounted in a ModuLaser Minimum or Standard Display module, each module in the cluster appear as a single address on the Aritech loop and the detector status is read from that address. Command Display mode is used when monitoring the status of multiple detectors and/or ModuLaser clusters with consecutive addresses from a single Aritech APIC card.

Szczegóły

  • Proste adresowanie w pętli urządzeń adresowalnych
  • Połączenie kablem taśmowym - bez dodatkowego okablowania
  • Możliwość podłączenia do modułu wyświetlacza ModuLaser
  • Łatwość ustawienia adresu
  • Bez konieczności ręcznego podłączania wejść i wyjść

Specyfikacja techniczna

General
Compatibility
Protokół Excellence
Physical
Physical dimensions
101 x 68 mm (S x W)(PCB)
Environmental
Operating temperature
-20ºC do +60ºC
Relative humidity
10 do 95% bez kondensacji
Environment
Indoor
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
BOSEC
CPR
Mounting
Ribbon cable with plug and socket - fixes to allotted space inside ModuLaser display module