9-30441

What is the price?

Excellence Addressable Panel Interface Card (APIC)

Simple addressing onto the addressable loop
Ribbon cable connection – no hard wiring
Piggy backs onto ModuLaser display module
Ease of address setting
Avoids the need to manually wire inputs and outputs

View all

Related products

9-30441-JUM

Aritech • Smoke • Addressable • Aspiration

9-30780

Display - Minimum / EN54 • Smoke • Conventional • Aspiration

9-30781

Display - Standard / EN54 • Smoke • Conventional • Aspiration

9-30782

Display - Command / EN54 • Smoke • Conventional • Aspiration

FHSD8300

Display - Minimum / EN54 • Smoke • Conventional • FHSD Series • Aspiration • ABS

FHSD8310

Display - Standard / EN54 • Smoke • Conventional • FHSD Series • Aspiration • ABS

Phasing out

FHSD8320

Display - Command / EN54 • Smoke • Conventional • FHSD Series • Aspiration • ABS

Phasing out

9-30780-KID

Display - Minimum / EN54 • Smoke • Conventional • Senator • Aspiration

STX2405-E

Output Current: 5 A • Up to 2 x 17 Ah

KE-IO3122

Excellence • Addressable • Supervised, Unsupervised

STX2402-E

Output Current: 2 A • Up to 2 x 17 Ah (in housing)

9-10954-25

Closed Pipe Clip - 25 pack • Smoke • Conventional • FHSD Series, Senator, Stratos • Accessory, Aspiration

At a glance

Description

The 9-30441 is an interface which can be fitted directly into the ModuLaser display module. The card plugs into the main control board inside the display module enclosure. The board enables the each detector (in the cluster or on the SenseNET network) to be directly addressed and communicate with the main fire control panel via the Aritech protocol.

Plug in terminals

Detectors are wired onto the loop using plug in terminals located on the detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card.

Single Display and Command Display modes

The Aritech APIC has two distinct modes of operation; single display and command display. When the interface is mounted in a ModuLaser Minimum or Standard Display module, each module in the cluster appear as a single address on the Aritech loop and the detector status is read from that address. Command Display mode is used when monitoring the status of multiple detectors and/or ModuLaser clusters with consecutive addresses from a single Aritech APIC card.

Details

Simple addressing onto the addressable loop
Ribbon cable connection – no hard wiring
Piggy backs onto ModuLaser display module

Ease of address setting
Avoids the need to manually wire inputs and outputs

Technical specifications

General
Compatibility	Aritech protocol

Physical
Physical dimensions	101 x 68 mm (W x H) (PCB)

Environmental
Operating temperature	-20 to +60ºC
Relative humidity	10 to 95% noncondensing
Environment	Indoor

Regulatory
Compliancy	CE REACH RoHS 3 WEEE
Certification	BOSEC CPR
Standards	EN54-17, EN54-18

Mounting
	Ribbon cable with plug and socket - fixes to allotted space inside ModuLaser display module

Downloads

All downloads

Datasheet
CPD / CPR
Installation sheet
Certificates
Other EU certificate
Technical documentation

Datasheet

System generated

Version 15 October 2026 ~500 kB

CPD / CPR

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.