Skip to main content

KE-AS3005W-CM

Excellence Series intelligent addressable visual alarm, ceiling mount
  • Standard first fix base shared with point detectors for ease of planning, logistics and installation
  • Base lock, address tag, trim skirt and surface cabling support for easy installation in all conditions
  • Loop powered with battery assisted activation allowing up to 128 devices per loop
  • 3 selectable VAD power levels that can be reconfigured from the CIE
  • Multi-stage evacuation support for application flexibility
View all

At a glance

General

The ZPC760W is a ZP7 series, addressable WHITE visual alarm device (VAD), approved to EN54:23 for ceiling mount applications. It features a clear lens with red LED element and incorporates a switch setting allowing it to be assigned a unique address on a Ziton fire panel loop.

Designed for installation at a height of up to 3m and with a discrete appearance, the ZPC760W with its deep base is suitable for a variety of applications. Its unique lens design distributes light evenly in a cylindrical shape to achieve the required illumination, whist using minimum current.

High Intensity Visual Signal

Designed to complement audible alarms, the ZPC760W provides a high intensity, synchronised visual signal for applications where alarm sounders alone are ineffective for notification or evacuation of a premises. In areas with high levels of background noise and manufacturing areas where intense industrial noise demands the use of ear protection, residential areas or other confined spaces such as bedrooms, bathrooms and toilets, or places with occupants who may be hard of hearing, the use of visual indication of alarms are ideal.

The ZPC760W is designed to meet the requirements of most local disability legislation and is certified as a primary alarm notification device under EN54:23.

Current Consumption and System Loads

Depending on the system requirements, the ZPC766W may be set to use less power. When coverage areas are small (less than 7.5 m radius), reducing the required range minimises the system current load. In addition the flash frequency may be set to 0.5 Hz (1 flash every 2 seconds) instead of 1 Hz (1 flash every second) in instances where power consumption needs to be further reduced.

External Power Supplies

The ZPC766W is installed using a fist fix base supplied with the unit. Loop and/or power cables for the VAD are connected in this base. In systems where loop lengths or current requirements are high, the ZPC766W may be powered directly from an external, EN54:4 approved power supply. The external supply is supervised and should there be a problem, the VAD automatically notifies the fire panel.

Details

  • Standard first fix base shared with point detectors for ease of planning, logistics and installation
  • Base lock, address tag, trim skirt and surface cabling support for easy installation in all conditions
  • Loop powered with battery assisted activation allowing up to 128 devices per loop
  • 3 selectable VAD power levels that can be reconfigured from the CIE
  • Multi-stage evacuation support for application flexibility
  • Pre-and post activation self testing ensuring maximum safety
  • Automatic synchronisation
  • Tri-colour diagnostic LED indicator for fast commissioning and fault finding support

Technical specifications

General
Compatibility
Kidde Commercial Excellence Systems
Addressing method
DIL switch
Monitoring
Activated
Battery level
Continuously self-checking
Fault
Electrical
Power supply type
Batteries
Loop powered
Batteries
3 x CR123 (optional)
Operating voltage
17 to 29 VDC
Communication voltage
4 to 11 V pulsed
Current consumption
250 µA (Quiescent)
Refer to the installation sheet for alarm current values (setting dependent)
VAD
Colour
Red
Rating
C-3-6 (Low) / C-3-7.5 (Mid) / C-3-9 (High)
Floor coverage
< 63.6 m² total
< 40.5 m² covering squares
Flash frequency
0.5 Hz (1 flash every 2 s)
VID
Synchronization
Supported
Physical
Physical dimensions
111 x 87 mm (Ø x H)
Net weight
300 g
Colour
Traffic white (RAL9016)
Mounting type
Base mount
Mounting position
Ceiling
Mounting height
Up to 3 m
Material
PC / ABS
Environmental
Operating temperature
-10 to +55°C
Storage temperature
−25 to +75°C
Relative humidity
10 to 93% (noncondensing)
Environment
Indoor
IP rating
IP21C
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
EN54-23