KMD300
300 Series carbon monoxide (CO) detector and base
- Complies with UNE 23300:1984, CE, WEEE, RoHS
- Microprocessor based, SMT technology
- Electrochemical CO sensor with high gas discrimination
- Resolution of up to 1 ppm, less than 5% error in measurement
- Fast response time
Related products
At a glance
Application
The KMD300 detector is designed as a carbon monoxide detector for the KM300 CO detection systems. The KMD300 is an intelligent device that delivers is carbon monoxide reading to the control panel for visualization via a 3-wire bus system.
Details
- Complies with UNE 23300:1984, CE, WEEE, RoHS
- Microprocessor based, SMT technology
- Electrochemical CO sensor with high gas discrimination
- Resolution of up to 1 ppm, less than 5% error in measurement
- Fast response time
- No calibration required
- Low current consumption
- BI-Colour diagnostic LED
- Supported by KM300 CO panels
- Usefull life of 5 years
- Number of detectors per zone <15
Technical specifications
| Electrical | ||
|---|---|---|
| Operating voltage |
10 to 20 VDC (supply voltage)
|
|
| Current consumption |
6 mA (quiescent current)
15 mA (alarm current)
|
|
| Detection | ||
|---|---|---|
| Detection principle |
Electrochemical
|
|
| Coverage area |
300 m² max.
|
|
| Range |
0 to 300 ppm
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
124 x 62 mm (Ø x H, including base)
|
|
| Net weight |
0.3 kg
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +40°C
|
|
| Storage temperature |
-10 to +70°C
|
|
| Relative humidity |
10 to 95%
|
|
| IP rating |
IP42
|
|
Downloads
All downloadsDatasheet
Technical documentation
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.