Skip to main content

TCC-0001

Ex. IS sounder, 24 VDC, red
  • Approved by ATEX, IECEx
  • Group I MI Ex ia I Ma
  • Group II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
  • Zones 0, 1, 2, 20, 21 & 22
  • Conforms to: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011)
View all

Related products

At a glance

IS Sonos sounder

The IS electronic sounder has been approved for use in potentially explosive atmospheres for Group I (Mining) & Group II (Above Ground) applications and incorporates a high Ingress Protected IP66 enclosure.
The sounder unit incorporates a two stage alarm option and has a total of 32 selectable tones, selectable via a dip switch on the PCB and produces up to 105 dB at 1 meter.
A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.
Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists & clicks into the pre-fixed base on commissioning avoiding any additional wiring & connections.
Further details can be found on the installation sheet’ This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo: 28 V, Io: 93 mA, Po: 660 mW, Ci: 0, Li 0. The minimum value of Uo should not drop below 23.6 V and the minimum value of Io should not drop below 50 mA.

Applications:

Fire, security, process control and general signalling

Details

  • Approved by ATEX, IECEx
  • Group I MI Ex ia I Ma
  • Group II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
  • Zones 0, 1, 2, 20, 21 & 22
  • Conforms to: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011)
  • Diode polarised and end-of-line resistor compatible
  • Dustproof and weatherproof

Technical specifications

General
Compatibility
Conventional I.S. zone controllers
System support
Conventional systems
Electrical
Power supply type
24 VDC
Operating voltage
24 VDC
Current consumption
33 mA
Sounder
Output level
<105 dB(A)
Selectable tones
32 (2 stages)
Physical
Physical dimensions
102 x 105 (ø x h)
3 x M20 (Cable entries)
Net weight
330 g
Colour
Red
Mounting type
Base mount
Mounting position
Ceiling
Wall
Mounting base
Deep
Material
Flame retardant Polycarbonate
Environmental
Vandal proof
No
Operating temperature
-40 to +55ºC
Relative humidity
>90% at 20ºC
IP rating
IP66
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CENELEC/ATEX
CPR
Standards
ATEX (EMT17ATEX0012X) IECEx (EMT 17.0005X)
EN54-3